Cablenet white surface back boxes are manufactured in tough ABS which is less brittle than traditional electrical back boxes and so are less prone to damage during installation. Single gang (86mm x 86mm) variants in 21mm, 27mm, 32mm, and 45mm depths. Double gang (86mm x 146mm) in 32mm and 45mm depths.
Each back box features a selection of mounting holes for ease of installation and various cable entry methods for maximum flexibility.

Cablenet white surface back boxes are manufactured in tough ABS which is less brittle than traditional electrical back boxes and so are less prone to damage during installation. Single gang (86mm x 86mm) variants in 21mm, 27mm, 32mm, and 45mm depths. Double gang (86mm x 146mm) in 32mm and 45mm depths.
Each back box features a selection of mounting holes for ease of installation and various cable entry methods for maximum flexibility.

Cablenet white surface back boxes are manufactured in tough ABS which is less brittle than traditional electrical back boxes and so are less prone to damage during installation. Single gang (86mm x 86mm) variants in 21mm, 27mm, 32mm, and 45mm depths. Double gang (86mm x 146mm) in 32mm and 45mm depths.
Each back box features a selection of mounting holes for ease of installation and various cable entry methods for maximum flexibility.

Cablenet white surface back boxes are manufactured in tough ABS which is less brittle than traditional electrical back boxes and so are less prone to damage during installation. Single gang (86mm x 86mm) variants in 21mm, 27mm, 32mm, and 45mm depths. Double gang (86mm x 146mm) in 32mm and 45mm depths.
Each back box features a selection of mounting holes for ease of installation and various cable entry methods for maximum flexibility.

Cablenet white surface back boxes are manufactured in tough ABS which is less brittle than traditional electrical back boxes and so are less prone to damage during installation. Single gang (86mm x 86mm) variants in 21mm, 27mm, 32mm, and 45mm depths. Double gang (86mm x 146mm) in 32mm and 45mm depths.
Each back box features a selection of mounting holes for ease of installation and various cable entry methods for maximum flexibility.

Cablenet white surface back boxes are manufactured in tough ABS which is less brittle than traditional electrical back boxes and so are less prone to damage during installation. Single gang (86mm x 86mm) variants in 21mm, 27mm, 32mm, and 45mm depths. Double gang (86mm x 146mm) in 32mm and 45mm depths.
Each back box features a selection of mounting holes for ease of installation and various cable entry methods for maximum flexibility.

A single gang UK Style (LJ6C) faceplate which accepts 1 x LJ6C module

A single gang UK Style (LJ6C) faceplate which accepts 2 x LJ6C modules

LJ6C blanking plate 25 x 38.5 for use in LJ6C (UK style) faceplates, floor boxes and POD (GOP) boxes

A single gang 50 x 50 flat faceplate which will accept up to two 25mm x 50mm modules. If only one module is installed, the faceplate can be finished off by using a 25mm x 50mm blanks or presenting the module centrally in the faceplate by using a pair of 12.5mm x 50mm blanks

A single gang 50 x 50 bevelled faceplate which will accept up to two 25mm x 50mm modules. If only one module is installed, the faceplate can be finished off by using a 25mm x 50mm blanks or presenting the module centrally in the faceplate by using a pair of 12.5mm x 50mm blanks

A double gang 50 x 100 bevelled faceplate which will accept up to four 50mm x 25mm modules. If the faceplate is not fully populated with modules, any gaps can be filled by using an appropriate number of 25mm x 50mm blanks or 12.5mm x 50mm blanks

A single gang faceplate which will accept up to two 25mm x 50mm modules. If only one module is installed, the faceplate can be finished off by using a 25mm x 50mm blanks or presenting the module centrally in the faceplate by using a pair of 12.5mm x 50mm blanks

A double gang 50 x 100 flat faceplate which will accept up to four 50mm x 25mm modules. If the faceplate is not fully populated with modules, any gaps can be filled by using an appropriate number of 25mm x 50mm blanks or 12.5mm x 50mm blanks

Half blank 25mm x 50mm pack of 2 in white, used to blank off any gaps in faceplates

Quarter blank 12.5mm x 50mm pack of 2 in white, used to centrally present a single module centrally in the faceplate

Quarter blank 12.5mm x 50mm pack of 2 in black, used to centrally present a single module centrally in the faceplate

Half blank 25mm x 50mm pack of 2 in black, used to blank off any gaps in faceplates

The 25mm x 50mm adaptors are used to fix keystone jacks into a standard Euro sized faceplate. The shutters are available in 25mm x 50mm and LJ6C sizes and can be flat or angled. All shutters come with a labelling window for easy outlet identification and a spring-loaded shutter to protect the jack socket from dust ingress.

The 25mm x 50mm Angled Adaptor for keystone jacks is part of the mounting hardware family. All adaptors come with a labelling window for easy outlet identification and a spring-loaded shutter to protect the connections in the jack from dust. The angled shutter helps to reduce the depth required in back boxes and floor boxes, thus providing improved cable management.

The LJ6C Angled Adaptor for keystone jacks is part of the mounting hardware family. All adaptors come with a labelling window for easy outlet identification and a spring-loaded shutter to protect the connections in the jack from dust. The angled shutter helps to reduce the depth required in back boxes and floor boxes, thus providing improved cable management.

A 25mm x 50mm 2 port Keystone adaptor - allows the installation of two keystone jacks in a single 25mm x 50mm aperture

Single and double gang electrophoretically coated back box providing a durable and long-lasting heavy-duty finish. These metal clad back boxes are ideally suited to an industrial environment where extra durability is required.
Both single and double gang come with a variety of 20mm knockouts to aid cable entry.
Supplied with an earth terminal to maintain grounding continuity.

Single and double gang electrophoretically coated back box providing a durable and long-lasting heavy-duty finish. These metal clad back boxes are ideally suited to an industrial environment where extra durability is required.
Both single and double gang come with a variety of 20mm knockouts to aid cable entry.
Supplied with an earth terminal to maintain grounding continuity.

Single gang electrophoretically coated back box providing a durable and long-lasting heavy-duty finish. These metal clad back boxes are ideally suited to an industrial environment where extra durability is required.
THIS VERSION OF THE METAL CLAD BACK BOX DOES NOT HAVE 20mm KNOCKOUTS
Supplied with an earth terminal to maintain grounding continuity.

A single LJ6C aperture in a single gang electrophoretically coated faceplate providing a durable and long-lasting heavy-duty finish.
These metal clad faceplates are ideally suited to an industrial environment where extra durability is required.

Double LJ6C apertures in a single gang electrophoretically coated faceplate providing a durable and long-lasting heavy-duty finish.
These metal clad faceplates are ideally suited to an industrial environment where extra durability is required.

The LJ6C Angled Adaptor for keystone jacks is part of the mounting hardware family. All adaptors come with a labelling window for easy outlet identification and a spring-loaded shutter to protect the connections in the jack from dust. The angled shutter helps to reduce the depth required in back boxes and floor boxes, thus providing improved cable management.

A single gang 50 x 50 office style faceplate will accept up to two 25mm x 50mm modules. If only one module is installed, the faceplate can be finished off by using a 25mm x 50mm blanks or presenting the module centrally in the faceplate by using a pair of 12.5mm x 50mm blanks

A double gang 50 x 100 office style faceplate which will accept up to four 50mm x 25mm modules. If the faceplate is not fully populated with modules, any gaps can be filled by using an appropriate number of 25mm x 50mm blanks or 12.5mm x 50mm blanks

Set of white plastic icons to help identify the type of connectivity used.
They are only suitable for the Maxxam 25x50 angled adaptors.