Coloured boots for rearTWIST BNC cable connectors

Colour coding
0 - Black
1 - Brown
2 - Red
3 - Orange
4 - Yellow
5 - Green
6 - Blue
7 - Violet
8 - Grey
9 - White
CY - Turquoise

Dummy-plate to cover D-shape cut-outs

Crimp tool die for HX-BNC


Pin crimping: 1.6mm
Shield and jacket: HEX crimp 7.36mm (A)

Crimp tool die for HX-R-BNC


Pin crimping: 1.60mm
Shield and jacket: HEX crimp 7.36mm (A), 5.0mm (B)

Crimp tool frame


ATTENTION: Suitable dies are DIE-R-* and DIE-R-BNC*

Chassis connector with black chromium plating, 4 solder contacts and 1 LC-Duplex feedthrough socket, waterproof to IP65 ingress protection in mated condition with SCDP-*.
The chassis connector acts as a feed-through allowing simplified installations by connecting a conventional LC-Duplex on the rear. It is built in the standard D size shell and features an automatic sealing cover for maximum dust and dirt protection and a Push-Pull locking mechanism for safe connection.

Features and Benefits
Suggested OEM equipment connector due to LC front compatibility
Designed as feedthrough with automatic sealing shutter
Shutter with silicone gasket protects optical connection from dust and dirt
Accommodates standard LC connectors on the rear for simple installation
Connection on the front side either by rugged OpticalCON or standard LC connector
The low cost of the chassis connector makes it a viable alternative to traditional connectors in fixed installations
IP65 ingress protection in mated condition with SCDP-*
Colour coding with SCDP-* according to ANSI/TIA-568.3-D Standard:
Multimode - black
Singlemode PC - blue
Singlemode APC - green

3 pole XLR female - BNC socket


Wired according to IEC 268-12:
Pin 2: signal
Pin 1 and 3: connected to ground

Features and Benefits
Versatile, pre-wired and ready to use adapters to reliably interlock various connector systems
Professional look and compact space saving design, based on the X Series (XLR worldwide accepted standard)
Rugged diecast shell for best reliability

3 pole XLR male - BNC socket


Wired according to IEC 268-12:
Pin 2: signal
Pin 1 and 3: connected to ground

Features and Benefits
Versatile, pre-wired and ready to use adapters to reliably interlock various connector systems
Professional look and compact space saving design, based on the X Series (XLR worldwide accepted standard)
Rugged diecast shell for best reliability

Lockable cable connector, power-in, screw terminals, blue
The PowerCON is a locking 3 conductor equipment AC connector with contacts for line, neutral and pre-mating ground contact.
It replaces appliance couplers wherever a very rugged solution in combination with a locking device is needed in order to guarantee a safe power connection.

Attention: The PowerCON is a connector without breaking capacity, i.e. the PowerCON should not be connected or disconnected under load or live!

Features and Benefits
Power-in (blue) and power-out (grey) versions with different keying to avoid the possibility of intermating
Fast and easy twist lock latching system
Extremely robust and reliable
Ergonomic design
Unique Neutrik chuck type strain relief
Improved kink protection by two-component bushing
UL, cUL recognized components - VDE certified, SEV approved
Branded with unique hologram - guarantees genuine and authentic Neutrik product

Lockable cable connector, power-out, screw terminals, grey
The PowerCON is a locking 3 conductor equipment AC connector with contacts for line, neutral and pre-mating ground contact.
It replaces appliance couplers wherever a very rugged solution in combination with a locking device is needed in order to guarantee a safe power connection.

Attention: The PowerCON is a connector without breaking capacity, i.e. the PowerCON should not be connected or disconnected under load or live!

Features and Benefits
Power-in (blue) and power-out (grey) versions with different keying to avoid the possibility of intermating
Fast and easy twist lock latching system
Extremely robust and reliable
Ergonomic design
Unique Neutrik chuck type strain relief
Improved kink protection by two-component bushing
UL, cUL recognized components - VDE certified, SEV approved
Branded with unique hologram - guarantees genuine and authentic Neutrik product

PowerCON coupler for linking cables - NAC3MPA-1 (power in) - PowerCON NAC3MPB-1 (power out),


The PowerCON is a locking 3 conductor equipment AC connector with contacts for line, neutral and pre-mating ground contact.
It replaces appliance couplers wherever a very rugged solution in combination with a locking device is needed in order to guarantee a safe power connection.

Attention: The PowerCON is a connector without breaking capacity, i.e. the PowerCON should not be connected or disconnected under load or live!

Female XLR chassis connector 110 ohm input - female BNC 75 ohm output. Interface balanced and coaxial lines.


Features and Benefits
Allow long cable runs for digital audio signals via low attenuation coax lines
Match balanced to coaxial lines
Match impedances 110 ohm to 75 ohm
Simple to use, passive units

Female BNC 75 ohm input - male XLR chassis connector 110 ohm output. Interface balanced and coaxial lines.


Features and Benefits
Allow long cable runs for digital audio signals via low attenuation coax lines
Match balanced to coaxial lines
Match impedances 110 ohm to 75 ohm
Simple to use, passive units

HDMI feedthrough adapter, D-shape housing
Neutrik's HDMI solution for the transmission of any digital TV and PC video format including high-definition video (HDTV) can be integrated in networks very easy.


Features and Benefits
To transmit any digital TV and PC video format including high-definition video (HDTV).
HDMI feedthrough adapter with a 19 pole HDMI receptacle at both ends
Dust and water resistant to IP65 safety standard in combination with NKHDMI-*
Universally accepted standard D-shape housing
Removable screen to chassis grounding:

Weatherproof OpticalCON DUO coupler (adapter) LC-Duplex for cable extensions with 4 copper wires (0.75mm).


Fibre Type - Multimode
Colour Coding - Black

Reversible USB 2.0 gender changer (type A and B), Nickel D-housing
Due to rising digitisation, the interface problems between audio/video networks, IT equipment, MP3 camcorders, etc. increase.
A rugged solution is needed.
Neutrik's reversible USB gender changer, mounted in the standardized D-shape housing, and the rugged patch cables solve this problem.

Features and Benefits
Ideal for audio networking and integration of computer-based equipment into audio systems
Dust and water resistant acc. to IP65 safety standard in combination with NKUSB-*
USB 2.0 gender changer type A-B (B-A)
Reversible insert offering type A or B on front or rear end
Universally accepted standard D-shape housing
Removable screen to chassis grounding

Reversible USB 2.0 gender changer (type A and B), black D-housing Due to rising digitisation the interface problems between audio/video networks, IT equipment, MP3 camcorders, etc. increase.
A rugged solution is needed.
Neutrik's reversible USB gender changer, mounted in the standardized D-shape housing, and the rugged patch cables solve this problem.

Features and Benefits
Ideal for audio networking and integration of computer based equipment into audio systems
Dust and water resistant acc. to IP65 safety standard in combination with NKUSB-*
Optional screen to chassis grounding
USB 2.0 gender changer type A-B (B-A)
Reversible insert offering type A or B on front or rear end
Universally accepted standard D-shape housing
Removable screen to chassis grounding:

Grounded BNC chassis connector, feedthrough in nickel D-shape housing
Neutrik's BNC chassis connectors offer a true 75 ohm design for serial and digital (HD) signals.
The machined brass connector body provides an extremely rugged and non-abrasive connection over long term use and is in addition recessed and therefore well protected in a D-shape housing (audio industry standard).

Features and Benefits
Gold plated cage type centre contact
True 75 ohm design meets the stringent HD requirements
Grounded panel mount
Standard D-shape housing - provides flush mounting and protection from damage
Colour coding possible

Grounded BNC bulkhead for panel mount, feedthrough, grounded
Neutrik's BNC bulkhead for panel mount offer a true 75 ohm design for serial and digital (HD & UHD) signals.
The machined brass connector body provides an extremely rugged and non-abrasive connection over long term use.

Features and Benefits
Gold plated cage type centre contact
True 75 ohm design meets the stringent HD requirements
Grounded panel mount

Isolated BNC bulkhead for panel mount, feedthrough
Neutrik's BNC bulkhead for panel mount offer a true 75 ohm design for serial and digital (HD & UHD) signals.
The machined brass connector body provides an extremely rugged and non-abrasive connection over long term use.

Features and Benefits
Gold plated cage type centre contact
True 75 ohm design meets the stringent HD requirements
Isolated panel mount (solves potential grounding problems and prevents common-mode influence with other connections conducted over the same panel ground potential)
Extra wide fastening nut avoids damaging the plastic thread

The rearTWIST HD BNC cable connector offers a true 75 ohm design and is perfectly suitable for HD applications.
The patented rearTWIST boot guarantees easy access even in high density applications and offers colour coding.

Suitable cables:
Belden 8241, CAE KX6A, Canare LV-61S, Cordial CVI (CVM) 06-37, CommScope 5563, Draka 0.6/3.7, Draka 0.6L/3.7, Proel HPC 805, RG59B/U, Sommer 600-0051 (M,L,S), Sommer 600-0054 (M,L,S), Klotz V06/37, Nexans HF 75 0,6/3,7 2YCY, Percon VK95

Crimp size:
Pin: 1.6mm (square)
Shield: 6.47mm (hex)

Features and Benefits
rearTWIST locking/unlocking using the easily accessible soft touch boot (Patent DE 100 48507)
Ideal for recessed bulkheads where access to the head of the connector might be an issue. These connectors turn from the back and not the front.
True 75 ohm design meets the stringent HDTV/DVD requirements
Leading area: Avoids tilting due to side forces to protect contacts from deformation. Guarantees a lifetime of min. 1000 mating cycles!
Snug-fit centre pin insert provides tactile feedback
Shield and jacket crimp technology prevents the problem of an exposed grounding braid on cable assemblies
Excellent cable protection and retention
Precise Swiss machined brass parts for outstanding durability
Accessories include colour coded boots in 10 standard colours, crimp tool and dies

The rearTWIST HD BNC cable connector offers a true 75 ohm design and is perfectly suitable for HD applications.
The patented rearTWIST boot guarantees easy access even in high density applications and offers colour coding.

Suitable cables:
Belden 1694A (ANH), Belden 4694R, Bryant BD SD11, Canare L-4.5CHD, Clark Wire CD7506-0, CommScope 5765, Gepco VSD2001, Suhner S05163-02, Suhner S05133-07, Percon VK77

Crimp size:
Pin: 1.6mm (square)
Shield: 7.36mm (hex)

Features and Benefits
rearTWIST locking/unlocking using the easily accessible soft touch boot (Patent DE 100 48507)
Ideal for recessed bulkheads where access to the "head" of the connector might be an issue. These connectors turn from the back and not the front.
True 75 ohm design meets the stringent HDTV/DVD requirements
Leading area: Avoids tilting due to side forces to protect contacts from deformation. Guarantees a lifetime of min. 1000 mating cycles!
Snug-fit centre pin insert provides tactile feedback
Shield and jacket crimp technology prevents the problem of an exposed grounding braid on cable assemblies
Excellent cable protection and retention
Precise Swiss machined brass parts for outstanding durability
Accessories include colour coded boots in 10 standard colours, crimp tool and dies

The rearTWIST HD BNC cable connector offers a true 75 ohm design and is perfectly suitable for HD applications.
The patented rearTWIST boot guarantees easy access even in high density applications and offers colour coding.

Suitable cables:
Belden 1694A (ANH), Belden 4694R, Bryant BD SD11, Canare L-4.5CHD, Clark Wire CD7506-0, CommScope 5765, Gepco VSD2001, Suhner S05163-02, Suhner S05133-07, Percon VK77

Crimp size:
Pin: 1.6mm (square)
Shield: 7.36mm (hex)

Features and Benefits
rearTWIST locking/unlocking using the easily accessible soft touch boot (Patent DE 100 48507)
Ideal for recessed bulkheads where access to the "head" of the connector might be an issue. These connectors turn from the back and not the front.
True 75 ohm design meets the stringent HDTV/DVD requirements
Leading area: Avoids tilting due to side forces to protect contacts from deformation. Guarantees a lifetime of min. 1000 mating cycles!
Snug-fit centre pin insert provides tactile feedback
Shield and jacket crimp technology prevents the problem of an exposed grounding braid on cable assemblies
Excellent cable protection and retention
Precise Swiss machined brass parts for outstanding durability
Accessories include colour coded boots in 10 standard colours, crimp tool and dies

The rearTWIST HD Tiny BNC cable connector is optimized for small cable diameters.
The additional leading ferrule eases the critical assembly of multicore or tiny cables.
Like all Neutrik BNCs it offers a true 75 ohm design and is perfectly suitable for HD applications.
The patented rearTWIST boot guarantees easy access even in high density applications and offers colour coding.

Suitable cables:
Canare L-1.5C2VS, Suhner S02223, Kroschu (341 270, 341 280), RG 179 B/U, Sommer 600-025-03 (05)

Crimp size:
Pin: 1.6mm (square)
Shield: 4.06mm (hex)

Features and Benefits
rearTWIST locking/unlocking using the easily accessible soft touch boot (Patent DE 100 48507)
Ideal for recessed bulkheads where access to the "head" of the connector might be an issue. These connectors turn from the back and not the front.
Optimized assembly for multicore or tiny cables
True 75 ohm design meets the stringent HDTV / DVD requirements
Leading area: Avoids tilting due to side forces to protect contacts from deformation. Guarantees a lifetime of min. 1000 mating cycles!
Snug-fit centre pin insert provides tactile feedback
Shield and jacket crimp technology prevents the problem of an exposed grounding braid on cable assemblies
Excellent cable protection and retention
Precise Swiss machined brass parts for outstanding durability
Accessories include colour coded boots in 10 standard colours, crimp tool and dies

3 pole female receptacle, solder cups, Nickel housing, silver contacts Universal D-size metal body XLR panel mount series. UL recognized component. Features and Benefits
Robust D metal shell
Standardized D sized 24mm panel cut-out
Solder cups on 3 - 7 pole version

3 pole female receptacle, solder cups, Nickel housing, silver contacts
The DLX series features a compact all metal housing with an ingenious duplex ground contact, which offers excellent RF protection and shielding.
It is the ideal match for mating with Neutrik's EMC XLR cable connector.

Features and Benefits
All metal housing offers best overall RF protection and electromagnetic shielding
Duplex ground contact for excellent contact integrity between chassis and cable connector
Unique cage type female contact on 3 pole version increases conductivity and reduces wear on the mated male contact
Female contact incorporates a solder barrier to prevent solder running into the contact mating area
Larger solder contacts for easier termination
Optional connection to easily join pin1 to chassis ground
D-style housing provides installation compatibility with industry standard D mounting dimensions

3 pole female receptacle, solder cups, black metal housing, gold contacts
The DLX series features a compact all metal housing with an ingenious duplex ground contact, which offers excellent RF protection and shielding.
It is the ideal match for mating with Neutrik's EMC XLR cable connector.

Features and Benefits
All metal housing offers best overall RF protection and electromagnetic shielding
Duplex ground contact for excellent contact integrity between chassis and cable connector
Unique cage type female contact on 3 pole version increases conductivity and reduces wear on the mated male contact
Female contact incorporates a solder barrier to prevent solder running into the contact mating area
Larger solder contacts for easier termination
Optional connection to easily join pin1 to chassis ground
D-style housing provides installation compatibility with industry standard D mounting dimensions

3 pole female receptacle, solder cups, Nickel housing, silver contacts, M3 mounting holes
The DLX series features a compact all metal housing with an ingenious duplex ground contact, which offers excellent RF protection and shielding.
It is the ideal match for mating with Neutrik's EMC XLR cable connector.

Features and Benefits
All metal housing offers best overall RF protection and electromagnetic shielding
Duplex ground contact for excellent contact integrity between chassis and cable connector
Unique cage type female contact on 3 pole version increases conductivity and reduces wear on the mated male contact
Female contact incorporates a solder barrier to prevent solder running into the contact mating area
Larger solder contacts for easier termination
Optional connection to easily join pin1 to chassis ground
D-style housing provides installation compatibility with industry standard D mounting dimensions

World's first 3 pole unisex XLR cable connector


Features and Benefits
World's first unisex XLR
3 pole male and female cable connector in one housing
Easy selectable gender - converted by sliding housing back and forth
Substitute adapters, ideal as an emergency kit
With all benefits of the XLR XX series
Branded with unique hologram - guarantees genuine and authentic Neutrik product

3 pole female cable connector with Nickel housing and silver contacts.
The next generation of the worldwide accepted standard of XLR cable connectors.
The successor of the X series offers several new features which make it more reliable, easier to assemble and improves contact integrity as well cable strain relief.

Features and Benefits
Unique cage design of female contact for low contact resistance and high integrity
Female contact incorporates a solder barrier to prevent solder running into the contact mating area
Female connector with improved solid metal latch which is larger and easier to handle
Additional ground spring contacts for better shell ground continuity
Improved chuck type strain relief provides higher pull-out force and makes assembly easier and faster
Boot with polyurethane gland gives high protection to cable bending stresses
Coloured rings and boots available for coding or identification
Sleek and ergonomic design - valuable and handy
Rugged zinc diecast shell, long lasting and dependable
Internal thread on shell is well protected against any damage
Branded with unique hologram - guarantees genuine and authentic Neutrik product

3 pole female cable connector with black metal housing and gold contacts.
The next generation of the worldwide accepted standard of XLR cable connectors.
The successor of the X series offers several new features which make it more reliable, easier to assemble and improves contact integrity as well cable strain relief.

Features and Benefits
Unique cage design of female contact for low contact resistance and high integrity
Female contact incorporates a solder barrier to prevent solder running into the contact mating area
Female connector with improved solid metal latch which is larger and easier to handle
Additional ground spring contacts for better shell ground continuity
Improved chuck type strain relief provides higher pull-out force and makes assembly easier and faster
Boot with polyurethane gland gives high protection to cable bending stresses
Coloured rings and boots available for coding or identification
Sleek and ergonomic design - valuable and handy
Rugged zinc diecast shell, long lasting and dependable
Internal thread on shell is well protected against any damage
Branded with unique hologram - guarantees genuine and authentic Neutrik product

3 pole female cable connector with black metal housing and silver contacts.
The next generation of the worldwide accepted standard of XLR cable connectors.
The successor of the X series offers several new features which make it more reliable, easier to assemble and improves contact integrity as well cable strain relief.

Features and Benefits
Unique cage design of female contact for low contact resistance and high integrity
Female contact incorporates a solder barrier to prevent solder running into the contact mating area
Female connector with improved solid metal latch which is larger and easier to handle
Additional ground spring contacts for better shell ground continuity
Improved chuck type strain relief provides higher pull-out force and makes assembly easier and faster
Boot with polyurethane gland gives high protection to cable bending stresses
Coloured rings and boots available for coding or identification
Sleek and ergonomic design - valuable and handy
Rugged zinc diecast shell, long lasting and dependable
Internal thread on shell is well protected against any damage
Branded with unique hologram - guarantees genuine and authentic Neutrik product

3 pole female cable connector with black metal housing and gold contacts.
The next generation of the worldwide accepted standard of XLR cable connectors.
The successor of the X series offers several new features which make it more reliable, easier to assemble and improves contact integrity as well cable strain relief.

Features and Benefits
Unique cage design of female contact for low contact resistance and high integrity
Female contact incorporates a solder barrier to prevent solder running into the contact mating area
Female connector with improved solid metal latch which is larger and easier to handle
Additional ground spring contacts for better shell ground continuity
Improved chuck type strain relief provides higher pull-out force and makes assembly easier and faster
Boot with polyurethane gland gives high protection to cable bending stresses
Coloured rings and boots available for coding or identification
Sleek and ergonomic design - valuable and handy
Rugged zinc diecast shell, long lasting and dependable
Internal thread on shell is well protected against any damage
Branded with unique hologram - guarantees genuine and authentic Neutrik product

3 pole male receptacle, solder cups, black metal housing, gold contacts
The DLX series features a compact all metal housing with an ingenious duplex ground contact, which offers excellent RF protection and shielding.
It is the ideal match for mating with Neutrik's EMC XLR cable connector.

Features and Benefits
All metal housing offers best overall RF protection and electromagnetic shielding
Duplex ground contact for excellent contact integrity between chassis and cable connector
Male connector's retention bar replaces plastic design with all metal version improving pull-out force
Larger solder contacts for easier termination
Optional connection to easily join pin1 to chassis ground
D-style housing provides installation compatibility with industry standard D mounting dimensions

3 pole male receptacle, solder cups, Nickel housing, silver contacts, M3 mounting holes
The DLX series features a compact all metal housing with an ingenious duplex ground contact, which offers excellent RF protection and shielding.
It is the ideal match for mating with Neutrik's EMC XLR cable connector.

Features and Benefits
All metal housing offers best overall RF protection and electromagnetic shielding
Duplex ground contact for excellent contact integrity between chassis and cable connector
Male connector's retention bar replaces plastic design with all metal version improving pull-out force
Larger solder contacts for easier termination
Optional connection to easily join pin1 to chassis ground
D-style housing provides installation compatibility with industry standard D mounting dimensions

3 pole right angle male cable connector, nickel housing, silver contacts
The RX Series is the right-angle version of the XX cable connector series.
The successor of the RC series offers several new features which make it more reliable, easier to assemble and improves contact integrity as well cable strain relief.

Features and Benefits
Extra slim right-angle connector
7 selectable cable outlet positions
Male connector with improved locking recess without window, more stringent housing increases durability
Improved chuck type strain relief provides higher pull-out force and makes assembly easier and faster
Boot with polyurethane gland gives high protection to cable bending stresses
Coloured rings and boots available for coding or identification
Sleek and ergonomic design - valuable and handy
Branded with unique hologram - guarantees genuine and authentic Neutrik product

3 pole male cable connector with Nickel housing and silver contacts.
The next generation of the worldwide accepted standard of XLR cable connectors.
The successor of the X series offers several new features which make it more reliable, easier to assemble and improves contact integrity as well cable strain relief.

Features and Benefits
Male connector with improved locking recess without "window", more stringent housing increases durability
Improved chuck type strain relief provides higher pull-out force and makes assembly easier and faster
Boot with polyurethane gland gives high protection to cable bending stresses
Coloured rings and boots available for coding or identification
Sleek and ergonomic design - valuable and handy
Rugged zinc diecast shell, long lasting and dependable
Internal thread on shell is well protected against any damage
Branded with unique hologram - guarantees genuine and authentic Neutrik product

3 pole male cable connector with black metal housing and gold contacts
The next generation of the worldwide accepted standard of XLR cable connectors.
The successor of the X series offers several new features which make it more reliable, easier to assemble and improves contact integrity as well cable strain relief.

Features and Benefits
Male connector with improved locking recess without window, more stringent housing increases durability
Improved chuck type strain relief provides higher pull-out force and makes assembly easier and faster
Boot with polyurethane gland gives high protection to cable bending stresses
Coloured rings and boots available for coding or identification
Sleek and ergonomic design - valuable and handy
Rugged zinc diecast shell, long lasting and dependable
Internal thread on shell is well protected against any damage
Branded with unique hologram - guarantees genuine and authentic Neutrik product

3 pole male cable connector with black metal housing and silver contacts.
The next generation of the worldwide accepted standard of XLR cable connectors.
The successor of the X series offers several new features which make it more reliable, easier to assemble and improves contact integrity as well cable strain relief.

Features and Benefits
Male connector with improved locking recess without window, more stringent housing increases durability
Improved chuck type strain relief provides higher pull-out force and makes assembly easier and faster
Boot with polyurethane gland gives high protection to cable bending stresses
Coloured rings and boots available for coding or identification
Sleek and ergonomic design - valuable and handy
Rugged zinc diecast shell, long lasting and dependable
Internal thread on shell is well protected against any damage
Branded with unique hologram - guarantees genuine and authentic Neutrik product

3 pole male cable connector with Nickel housing and silver contacts.
The next generation of the worldwide accepted standard of XLR cable connectors.
The successor of the X series offers several new features which make it more reliable, easier to assemble and improves contact integrity as well cable strain relief.

Features and Benefits
Male connector with improved locking recess without "window", more stringent housing increases durability
Improved chuck type strain relief provides higher pull-out force and makes assembly easier and faster
Boot with polyurethane gland gives high protection to cable bending stresses
Coloured rings and boots available for coding or identification
Sleek and ergonomic design - valuable and handy
Rugged zinc diecast shell, long lasting and dependable
Internal thread on shell is well protected against any damage
Branded with unique hologram - guarantees genuine and authentic Neutrik product

4 pole female receptacle, solder cups, Nickel housing, silver contacts
The DLX series features a compact all metal housing with an ingenious duplex ground contact, which offers excellent RF protection and shielding.

Features and Benefits
All metal housing offers best overall RF protection and electromagnetic shielding
Duplex ground contact for excellent contact integrity between chassis and cable connector
Female contact incorporates a solder barrier to prevent solder running into the contact mating area
Larger solder contacts for easier termination
Optional connection to easily join pin1 to chassis ground
D-style housing provides installation compatibility with industry standard D mounting dimensions

4 pole female receptacle, solder cups, Nickel housing, silver contacts, M3 mounting holes
The DLX series features a compact all metal housing with an ingenious duplex ground contact, which offers excellent RF protection and shielding.

Features and Benefits
All metal housing offers best overall RF protection and electromagnetic shielding
Duplex ground contact for excellent contact integrity between chassis and cable connector
Female contact incorporates a solder barrier to prevent solder running into the contact mating area
Larger solder contacts for easier termination
Optional connection to easily join pin1 to chassis ground
D-style housing provides installation compatibility with industry standard D mounting dimensions

4 pole female cable connector with Nickel housing and silver contacts.
The industry standard XLR cable connector, easy to assemble with only 4 parts and no screws. Compact design with sturdy diecast shell, fibreglass reinforced hard plastic insert and chuck type strain relief for secure clamping of all cables.

Features and Benefits
Rugged zinc diecast shell, long lasting and durable
Chuck type strain relief system for secure clamping of cables
Boot with rubber gland gives high protection against bending stresses
Coloured rings and boots available for coding and marking
UL recognized components

4 pole female cable connector with black metal housing and silver contacts.
The next generation of the worldwide accepted standard of XLR cable connectors.
The successor of the X series offers several new features which make it more reliable, easier to assemble and improves contact integrity as well cable strain relief.

Features and Benefits
Unique cage design of female contact for low contact resistance and high integrity
Female contact incorporates a solder barrier to prevent solder running into the contact mating area
Female connector with improved solid metal latch which is larger and easier to handle
Additional ground spring contacts for better shell ground continuity
Improved chuck type strain relief provides higher pull-out force and makes assembly easier and faster
Boot with polyurethane gland gives high protection to cable bending stresses
Coloured rings and boots available for coding or identification
Sleek and ergonomic design - valuable and handy
Rugged zinc diecast shell, long lasting and dependable
Internal thread on shell is well protected against any damage
Branded with unique hologram - guarantees genuine and authentic Neutrik product

4 pole right angle male cable connector, nickel housing, silver contacts
The RX Series is the right-angle version of the XX cable connector series.
The successor of the RC series offers several new features which make it more reliable, easier to assemble and improves contact integrity as well cable strain relief.

Features and Benefits
Extra slim right-angle connector
7 selectable cable outlet positions
Male connector with improved locking recess without window, more stringent housing increases durability
Improved chuck type strain relief provides higher pull-out force and makes assembly easier and faster
Boot with polyurethane gland gives high protection to cable bending stresses
Coloured rings and boots available for coding or identification
Sleek and ergonomic design - valuable and handy
Branded with unique hologram - guarantees genuine and authentic Neutrik product

4 pole male cable connector with black metal housing and silver contacts.
The next generation of the worldwide accepted standard of XLR cable connectors.
The successor of the X series offers several new features which make it more reliable, easier to assemble and improves contact integrity as well cable strain relief.

Features and Benefits
Male connector with improved locking recess without window, more stringent housing increases durability
Improved chuck type strain relief provides higher pull-out force and makes assembly easier and faster
Boot with polyurethane gland gives high protection to cable bending stresses
Coloured rings and boots available for coding or identification
Sleek and ergonomic design - valuable and handy
Rugged zinc diecast shell, long lasting and dependable
Internal thread on shell is well protected against any damage
Branded with unique hologram - guarantees genuine and authentic Neutrik product

4 pole male cable connector with Nickel housing and silver contacts.
The next generation of the worldwide accepted standard of XLR cable connectors.
The successor of the X series offers several new features which make it more reliable, easier to assemble and improves contact integrity as well cable strain relief.

Features and Benefits
Male connector with improved locking recess without window, more stringent housing increases durability
Improved chuck type strain relief provides higher pull-out force and makes assembly easier and faster
Boot with polyurethane gland gives high protection to cable bending stresses
Coloured rings and boots available for coding or identification
Sleek and ergonomic design - valuable and handy
Rugged zinc diecast shell, long lasting and dependable
Internal thread on shell is well protected against any damage
Branded with unique hologram - guarantees genuine and authentic Neutrik product

5 pole female receptacle, solder cups, black metal housing, gold contacts
Universal D-size metal body XLR panel mount series. UL recognized component.

Features and Benefits
Robust D metal shell
Standardised D sized 24mm panel cut-out
Solder cups on 3 - 7 pole version

5 pole female receptacle, solder cups, Nickel housing, silver contacts
The DLX series features a compact all metal housing with an ingenious duplex ground contact, which offers excellent RF protection and shielding.

Features and Benefits
All metal housing offers best overall RF protection and electromagnetic shielding
Duplex ground contact for excellent contact integrity between chassis and cable connector
Female contact incorporates a solder barrier to prevent solder running into the contact mating area
Larger solder contacts for easier termination
Optional connection to easily join pin1 to chassis ground
D-style housing provides installation compatibility with industry standard D mounting dimensions

5 pole female receptacle, solder cups, black metal housing, gold contacts
The DLX series features a compact all metal housing with an ingenious duplex ground contact, which offers excellent RF protection and shielding.

Features and Benefits
All metal housing offers best overall RF protection and electromagnetic shielding
Duplex ground contact for excellent contact integrity between chassis and cable connector
Female contact incorporates a solder barrier to prevent solder running into the contact mating area
Larger solder contacts for easier termination
Optional connection to easily join pin1 to chassis ground
D-style housing provides installation compatibility with industry standard D mounting dimensions

5 pole female receptacle, solder cups, Nickel housing, silver contacts, M3 mounting holes
The DLX series features a compact all metal housing with an ingenious duplex ground contact, which offers excellent RF protection and shielding.

Features and Benefits
All metal housing offers best overall RF protection and electromagnetic shielding
Duplex ground contact for excellent contact integrity between chassis and cable connector
Female contact incorporates a solder barrier to prevent solder running into the contact mating area
Larger solder contacts for easier termination
Optional connection to easily join pin1 to chassis ground
D-style housing provides installation compatibility with industry standard D mounting dimensions

5 pole female cable connector with Nickel housing and silver contacts.
The next generation of the worldwide accepted standard of XLR cable connectors.
The successor of the X series offers several new features which make it more reliable, easier to assemble and improves contact integrity as well cable strain relief.

Features and Benefits
Unique cage design of female contact for low contact resistance and high integrity
Female contact incorporates a solder barrier to prevent solder running into the contact mating area
Female connector with improved solid metal latch which is larger and easier to handle
Additional ground spring contacts for better shell ground continuity
Improved chuck type strain relief provides higher pull-out force and makes assembly easier and faster
Boot with polyurethane gland gives high protection to cable bending stresses
Coloured rings and boots available for coding or identification
Sleek and ergonomic design - valuable and handy
Rugged zinc diecast shell, long lasting and dependable
Internal thread on shell is well protected against any damage
Branded with unique hologram - guarantees genuine and authentic Neutrik product

5 pole female cable connector with black metal housing and gold contacts.
The next generation of the worldwide accepted standard of XLR cable connectors.
The successor of the X series offers several new features which make it more reliable, easier to assemble and improves contact integrity as well cable strain relief.

Features and Benefits
Unique cage design of female contact for low contact resistance and high integrity
Female contact incorporates a solder barrier to prevent solder running into the contact mating area
Female connector with improved solid metal latch which is larger and easier to handle
Additional ground spring contacts for better shell ground continuity
Improved chuck type strain relief provides higher pull-out force and makes assembly easier and faster
Boot with polyurethane gland gives high protection to cable bending stresses
Coloured rings and boots available for coding or identification
Sleek and ergonomic design - valuable and handy
Rugged zinc diecast shell, long lasting and dependable
Internal thread on shell is well protected against any damage
Branded with unique hologram - guarantees genuine and authentic Neutrik product

5 pole female cable connector with black metal housing and silver contacts.
The next generation of the worldwide accepted standard of XLR cable connectors.
The successor of the X series offers several new features which make it more reliable, easier to assemble and improves contact integrity as well cable strain relief.

Features and Benefits
Unique cage design of female contact for low contact resistance and high integrity
Female contact incorporates a solder barrier to prevent solder running into the contact mating area
Female connector with improved solid metal latch which is larger and easier to handle
Additional ground spring contacts for better shell ground continuity
Improved chuck type strain relief provides higher pull-out force and makes assembly easier and faster
Boot with polyurethane gland gives high protection to cable bending stresses
Coloured rings and boots available for coding or identification
Sleek and ergonomic design - valuable and handy
Rugged zinc diecast shell, long lasting and dependable
Internal thread on shell is well protected against any damage
Branded with unique hologram - guarantees genuine and authentic Neutrik product

5 pole male receptacle, solder cups, Nickel housing, silver contacts
The DLX series features a compact all metal housing with an ingenious duplex ground contact, which offers excellent RF protection and shielding.

Features and Benefits
All metal housing offers best overall RF protection and electromagnetic shielding
Duplex ground contact for excellent contact integrity between chassis and cable connector
Male connector's retention bar replaces plastic design with all metal version improving pull-out force
Larger solder contacts for easier termination
Optional connection to easily join pin1 to chassis ground
D-style housing provides installation compatibility with industry standard D mounting dimensions

5 pole male cable connector with black metal housing and silver contacts.
The next generation of the worldwide accepted standard of XLR cable connectors.
The successor of the X series offers several new features which make it more reliable, easier to assemble and improves contact integrity as well cable strain relief.

Features and Benefits
Male connector with improved locking recess without window, more stringent housing increases durability
Improved chuck type strain relief provides higher pull-out force and makes assembly easier and faster
Boot with polyurethane gland gives high protection to cable bending stresses
Coloured rings and boots available for coding or identification
Sleek and ergonomic design - valuable and handy
Rugged zinc diecast shell, long lasting and dependable
Internal thread on shell is well protected against any damage
Branded with unique hologram - guarantees genuine and authentic Neutrik product

7 pole female receptacle, solder cups, Nickel housing, silver contacts
The DLX series features a compact all metal housing with an ingenious duplex ground contact, which offers excellent RF protection and shielding.

Features and Benefits
All metal housing offers best overall RF protection and electromagnetic shielding
Duplex ground contact for excellent contact integrity between chassis and cable connector
Female contact incorporates a solder barrier to prevent solder running into the contact mating area
Larger solder contacts for easier termination
Optional connection to easily join pin1 to chassis ground
D-style housing provides installation compatibility with industry standard D mounting dimensions

7 pole female cable connector with Nickel housing and silver contacts.
The next generation of the worldwide accepted standard of XLR cable connectors.
The successor of the X series offers several new features which make it more reliable, easier to assemble and improves contact integrity as well cable strain relief.

Features and Benefits
Unique cage design of female contact for low contact resistance and high integrity
Female contact incorporates a solder barrier to prevent solder running into the contact mating area
Female connector with improved solid metal latch which is larger and easier to handle
Additional ground spring contacts for better shell ground continuity
Improved chuck type strain relief provides higher pull-out force and makes assembly easier and faster
Boot with polyurethane gland gives high protection to cable bending stresses
Coloured rings and boots available for coding or identification
Sleek and ergonomic design - valuable and handy
Rugged zinc diecast shell, long lasting and dependable
Internal thread on shell is well protected against any damage
Branded with unique hologram - guarantees genuine and authentic Neutrik product

7 pole male cable connector, Nickel housing and silver contacts.
The next generation of the worldwide accepted standard of XLR cable connectors.
The successor of the X series offers several new features which make it more reliable, easier to assemble and improves contact integrity as well cable strain relief.

Features and Benefits
Male connector with improved locking recess without window, more stringent housing increases durability
Improved chuck type strain relief provides higher pull-out force and makes assembly easier and faster
Boot with polyurethane gland gives high protection to cable bending stresses
Coloured rings and boots available for coding or identification
Sleek and ergonomic design - valuable and handy
Rugged zinc diecast shell, long lasting and dependable
Internal thread on shell is well protected against any damage
Branded with unique hologram - guarantees genuine and authentic Neutrik product

Panel mount RJ45 receptacle with IDC terminals, A-Series cut-out with latch lock, max. panel thickness 3mm.
Mounting screws included.
The EtherCON Series is a ruggedized and lockable RJ45 connector system, optimized for pro audio, video and lightning network applications.
The chassis connectors are shaped to fit into standardized panels out of the entertainment industry.
The all plastic A-Series offers the most space saving and cost-effective design.

Attention: Does not intermate with CAT6 cable connector NE8MC6-MO and NKE6S* cables.

Features and Benefits
Accommodates rugged EtherCON NE8MC* or any standard RJ45 plug
Approved latch lock system
Most space saving and cost-effective design
Complies with Cat5e according to TIA/EIA 568B and ISO/IEC 11801 standard
Selectable ground - panel connection
Easy and quick mounting using Krone punch down terminals

RJ45 feedthrough receptacle, D-shape metal flange with the latch lock, mounting screws included
The EtherCON Series is a ruggedized and lockable RJ45 connector system, optimized for pro audio, video and lightning network applications.
The chassis connectors are shaped to fit into standardized panels out of the entertainment industry.
The D-Series offers the most rugged design of the EtherCON series and is perfectly suitable for panel mount and the installer market.

Attention: Does not intermate with CAT6 cable connector NE8MC6-MO and NKE6S* cables.

Features and Benefits
Accommodates NE8MC* or any standard RJ45 plug
Approved latch lock system
Mountable from the front or rear of the panel
Complies with Cat5e according to TIA/EIA 568B and ISO/IEC 11801 standard

RJ45 feedthrough receptacle, black D-shape metal flange with the latch lock, mounting screws included
The EtherCON Series is a ruggedized and lockable RJ45 connector system, optimized for pro audio, video and lightning network applications.
The chassis connectors are shaped to fit into standardized panels out of the entertainment industry.
The D-Series offers the most rugged design of the EtherCON series and is perfectly suitable for panel mount and the installer market.

Attention: Does not intermate with Cat6 cable connector NE8MC6-MO and NKE6S* cables.

Features and Benefits
Accommodates NE8MC* or any standard RJ45 plug
Approved latch lock system
Mountable from the front or rear of the panel
Complies with Cat5e according to TIA/EIA 568B and ISO/IEC 11801 standard

RJ45 feedthrough receptacle, D-shape metal flange with the latch lock, mounting screws included
The EtherCON Series is a ruggedized and lockable RJ45 connector system, optimized for pro audio, video and lightning network applications.
The chassis connectors are shaped to fit into standardized panels out of the entertainment industry.
The D-Series offers the most rugged design of the EtherCON series and is perfectly suitable for panel mount and the installer market.

Attention: Does not intermate with CAT6 cable connector NE8MC6-MO and NKE6S* cables.

Features and Benefits
Accommodates NE8MC* or any standard RJ45 plug
Approved latch lock system
Mountable from the front or rear of the panel
Complies with Cat5e according to TIA/EIA 568B and ISO/IEC 11801 standard

Vertical PCB panel mount RJ45 receptacle, D-shape metal flange with latch lock, max. panel thickness 4mm, mounting screws not included
The EtherCON Series is a ruggedized and lockable RJ45 connector system, optimized for pro audio, video and lightning network applications.
The chassis connectors are shaped to fit into standardized panels out of the entertainment industry.
The D-Series offers the most rugged design of the EtherCON series and is perfectly suitable for panel mount and the installer market.

Attention: Does not intermate with CAT6 cable connector NE8MC6-MO and NKE6S* cables.

Features and Benefits
Accommodates NE8MC* or any standard RJ45 plug
Complies with Cat5e according to TIA/EIA 568B and ISO/IEC 11801 standard
Approved latch lock system
Mountable from the front or rear of the panel
Ground-panel connection

Panel mount receptacle with IDC punch down terminals, D-sized metal flange with latch lock, max. panel thickness 4mm, mounting screws included
The EtherCON Series is a ruggedized and lockable RJ45 connector system, optimized for pro audio, video and lightning network applications.
The chassis connectors are shaped to fit into standardized panels out of the entertainment industry.
The D-Series offers the most rugged design of the EtherCON series and is perfectly suitable for panel mount and the installer market.

Attention: Does not intermate with Cat6 cable connector NE8MC6-MO and NKE6S* cables.

Features and Benefits
Accommodates NE8MC* or any standard RJ45 plug
Approved latch lock system
Mountable from the front or rear of the panel
Complies with Cat5e according to TIA/EIA 568B and ISO/IEC 11801 standard
Selectable ground - panel connection
Easy and quick mounting using Krone punch down terminals

Panel mount receptacle with IDC punch down terminals, black D-sized metal flange with latch lock, max. panel thickness 4mm, mounting screws included
The EtherCON Series is a ruggedized and lockable RJ45 connector system, optimized for pro audio, video and lightning network applications.
The chassis connectors are shaped to fit into standardized panels out of the entertainment industry.
The D-Series offers the most rugged design of the EtherCON series and is perfectly suitable for panel mount and the installer market.

Attention: Does not intermate with CAT6 cable connector NE8MC6-MO and NKE6S* cables.

Features and Benefits
Accommodates NE8MC* or any standard RJ45 plug
Approved latch lock system
Mountable from the front or rear of the panel
Complies with Cat5e according to TIA/EIA 568B and ISO/IEC 11801 standard
Selectable ground - panel connection
Easy and quick mounting using Krone punch down terminals

The EtherCON Cat6 D-shape panel connectors with black metal housing and secure latching system offer a tool-free and gas-tight IDC termination, which makes cable assembly easy and fast.


Attention:
Intermates ONLY with NE8MC6-MO, NKE6S-* and generic RJ45 connectors
Not compatible with the EtherCON cable connector carriers NE8MC* and the Cat6a cable connectors NE8MX6*

Features and Benefits
Cat6 compliant - data rate up to 10 GBit/s
Cat6 performance - fast data transmission and high bandwidth applications
Cat6 specifications according TIA/EIA 568B, ISO/IEC 11801, EN 50173
IP65 - Dust and waterproof in mated condition
Shielded system - high noise immunity and EMI protection
Push Pull mating - secure and proven locking system
Ground lead jumper on panel connector with selectable grounding option
Gas-tight IDC termination without tool

EtherCON RJ45 feedthrough coupler for cable extensions


Features and Benefits
Accommodates NE8MC* or any standard RJ45 plug
The adapter offers the approved latch lock system
The D shape adapters are problem solvers for various intermating problems for professional and semi-professional applications

Phono socket in nickel D-shape housing, black isolation washers, solder version


Features and Benefits
Precisely machined to our demanding quality standards
Gold plated contacts

2 pole cable connector, chuck type strain relief
The industry-standard for loudspeaker connections offer extremely reliable and robust cable connectors with a reliable locking system.
They feature solid contacts with screw-type terminals including a stranded wire protection which offer also solder termination.

Features and Benefits
Current rating 40A continuous, 50A audio signal with 50% duty cycle
Only 3 parts, easy to assemble
High impact materials - long-lasting and reliable
Easy and extremely precise locking system Quick Lock
1-piece strain relief, chuck for 6mm to 10mm cable diameter.
Improved grip on latch
Mates with 4-pole chassis connector as well and makes contact with +1/-1

2 pole chassis connector, black D-size flange, countersunk holes, 3/16 inch flat tabs.
Does not intermate with the 4-pole cable connector
The SpeakON panel mount connectors are the standard chassis connectors for loudspeaker/amplifier interconnections.
They feature a unique metal locking system, making contact only once fully locked.
The SpeakON receptacles are robust, versatile and easy to terminate.

Features and Benefits
Current rating 30A rms
Glass reinforced materials make it extremely robust and dependable
Precise keyway for secure mating
Accurate twist lock latching system
Metal insert in locking area
Airtight design - optimized for speaker applications

4 pole right-angle cable connector, chuck type strain relief, dark grey bushing
The industry-standard for loudspeaker connections offer extremely reliable and robust cable connectors with a reliable locking system. They feature solid contacts with screw-type terminals including a stranded wire protection which offer also solder termination.

Features and Benefits
Current rating 40A rms continuous
Up to 50A audio signal, duty cycle 50%
Easy to assemble
High impact materials - long-lasting and reliable
Easy and extremely precise locking system Quick Lock
Improved grip on latch
1-piece strain relief, chuck for 6mm to 14.5mm cable O.D.
Colour coding possible
Improved screw-type termination for highest pull-out force

4 pole cable connector, chuck type strain relief, dark grey bushing
The industry-standard for loudspeaker connections offer extremely reliable and robust cable connectors with a reliable locking system. They feature solid contacts with screw-type terminals including a stranded wire protection which offer also solder termination.

Features and Benefits
Current rating 40A rms continuous
Up to 50A audio signal, duty cycle 50%
Only 3 parts, easy to assemble
High impact materials - long-lasting and reliable
Easy and extremely precise locking system Quick Lock
Improved grip on latch
1-piece strain relief, chuck for 7 to 14.5 mm cable O.D.
Colour coding possible
Improved screw-type termination for highest pull-out force

Lockable 4 pole SpeakON adapter
Links two NL2/4F*s together for cable extension.
Changes gender to male when permanently locked on the cable.
Features permanent secure connection on a SpeakON cable connector using 2nd lock. Can be permanently attached to NL2/4F*.

4 pole chassis connector, black D-size flange, countersunk thru holes, 3/16 inch flat tabs
The SpeakON panel mount connectors are the standard chassis connectors for loudspeaker / amplifier interconnections. They feature a unique metal locking system, making contact only once fully locked. The SpeakON receptacles are robust, versatile and easy to terminate.

Features and Benefits
Current rating 30A rms
Glass reinforced materials make it extremely robust and dependable
Precise keyway for secure mating
Accurate twist lock latching system
Metal insert in locking area
Airtight design - optimized for speaker applications
Branded with unique hologram - guarantees genuine and authentic Neutrik product

4 pole chassis connector, black D-size flange, countersunk thru holes, screw termination. This chassis connector is not airtight.

The SpeakON panel mount connectors are the standard chassis connectors for loudspeaker/amplifier interconnections. They feature a unique metal locking system, making contact only once fully locked. The SpeakON receptacles are robust, versatile and easy to terminate.

Features and Benefits
Current rating 30A rms
Glass reinforced materials make it extremely robust and dependable
Precise keyway for secure mating
Accurate twist lock latching system
Metal insert in locking area
Branded with unique hologram - guarantees genuine and authentic Neutrik product

8 pole cable connector, latch lock, chuck type strain relief for cables 8mm - 20mm diameter, 30A continuous per contact
The industry-standard for loudspeaker connections offer extremely reliable and robust cable connectors with a reliable locking system. They feature solid contacts with screw-type terminals including a stranded wire protection which offer also solder termination.

Features and Benefits
Current rating 30A rms continuous
Reliable and robust, easy and fast to assemble
Contacts are touch proof and meet all safety requirements (IEC, UL, CSA)
Accurate and dependable twist lock latching system Quick Lock
High impact material for insert and housing, long-lasting and dependable
Chuck type strain relief system for secure clamping of cable

4 pole male cable connector, metal housing, chuck type strain relief
The SpeakON STX Series was especially designed for heavy duty amplifier-loudspeaker applications like professional touring.
The extremely rugged and durable STX Series features an all metal housing.

Features and Benefits
Current rating 40A continuous, 50A audio signal with 50% duty cycle
Robust and durable all metal housing
Sealing ring provides weatherproof IP54 rating in mated condition
Reinforced metal quick lock system for ease and precise locking
Extra-large solder contacts for up to 6mm (AWG10) wires
Mate with all available SpeakON products

Chassis connector with black chromium plating, 4 solder contacts and 1 LC-Duplex feedthrough socket, waterproof to IP65 ingress protection in mated condition with SCDP-*.
The chassis connector acts as a feed-through allowing simplified installations by connecting a conventional LC-Duplex on the rear. It is built in the standard D size shell and features an automatic sealing cover for maximum dust and dirt protection and a Push-Pull locking mechanism for safe connection.

Features and Benefits
Suggested OEM equipment connector due to LC front compatibility
Designed as feedthrough with automatic sealing shutter
Shutter with silicone gasket protects optical connection from dust and dirt
Accommodates standard LC connectors on the rear for simple installation
Connection on the front side either by rugged OpticalCON or standard LC connector
The low cost of the chassis connector makes it a viable alternative to traditional connectors in fixed installations
IP65 ingress protection in mated condition with SCDP-*
Colour coding with SCDP-* according to ANSI/TIA-568.3-D Standard:
Multimode - black
Single mode PC - blue
Single mode APC - green

3 pole right-angle 1/4 inch professional phone plug, nickel contacts, nickel shell
The heavy-duty professional phone plug series improves on the design of the existing C series by offering the thinnest available A-gauge 1/4 inch plug with unique Neutrik chuck type strain relief on the market. The slimline shell with a width of 14.5mm meets the most recent requirements for highest density jackfields (15.88mm jack pitch).
The precise machined one-piece tip contact without rivets makes it unique and avoids hook up in a socket or break off the tip.
The Plug X Series serves all applications such as guitar applications, audio cables, snakes, speakers, amplifiers and mixing desks.

Features and Benefits
All metal housing eliminates the plastic cover of the predecessor NP*RCS and improves further durability and EMI protection
Extra slim 1/4 inch plug for highest packing density
Robust diecast shell in stylish design
Proven chuck type strain relief for reliable cable retention
Sleek design for best handling convenience
Precision machined one-piece contacts - avoid hook up of tip contact

Phono jack to phono jack adapter
Phono jack female to female adaptor with a nickel plated brass outer shell, nickel plated brass contacts and thermoplastic insulation.
Rated current and contact resistance values will depend on the mated connector.

Panel Mount Phono Jack
Panel mount phono jack a gold plated brass outer shell, gold plated brass contacts and thermoplastic insulation.
Rated current and contact resistance values will depend on the mated connector.

Phono (RCA) Plugs
Phono plug with a black shell, gold plated contacts, rubber boot for best antikink protection and a chuck type strain relief for cable O.D. 3.5mm to 6.1mm
Black colour ring in the body of the housing to aid identify the polarity of the connected cables.

3U OpticalCON panel frame


Features and Benefits
Space saving design, ideal for cramped rack applications such as OB truck I/O panels
Best cable bend protection for mated cables due to 45 degree angled outlet position
Frame can be equipped with different plates (see accessories)

OpticalCON Panel frame blind plate

For use on the NZPF3RU and NZPF1RU OpticalCON panels

The NZPFD plate can be loaded with OpticalCON DUO or QUAD chassis connectors. Including lettering possibility.

For use on the NZPF3RU and NZPF1RU OpticalCON panels.

The SCDP-* sealing gasket provides a dust and water-resistant assembly for all D-shape chassis connectors to front panels.


Colour coding:
0-black
2-red
4-yellow
5-green
6-blue
9-white

Transparent coding ring which allows an individual customized labelling, branding, coding etc.


Just place an individual coloured and or lettered paper or tape (e.g. Brother/Dymo) inside the ring.

Box of 100 pcs.

XLR 3 Pole Male to Male Audio Cable

Manufactured using the high quality industry recognised Neutrik Male XLR connectors and our Flexible XLR Microphone cable 2 Core 28 AWG with 95% Braided Screen

Bespoke lengths are available - PLEASE CALL SALES FOR PRICING AND LEAD-TIME

XLR 3 Pole Female to Female Audio Cable

Manufactured using the high quality industry recognised Neutrik Female XLR connectors and connected using our Flexible XLR Microphone cable 2 Core 28 AWG with 95% Braided Screen

Standard lengths are - 1m, 2m, 3m, 5m, 10m, 15m, 20m and 30m

Bespoke lengths are available - PLEASE CALL SALES FOR PRICING AND LEAD-TIME

0.5m SpeakON 4 Pole Connectors 2.5mm Cable (Neutrik)

Manufactured using the high quality industry recognised SpeakON connectors and our 4 Pole 4 Core 2.5mm Speaker Cable

Bespoke lengths are available - PLEASE CALL SALES FOR PRICING AND LEAD-TIME

XLR 3 Pole Male to Male Audio Cable

Manufactured using the high quality industry recognised Neutrik Male XLR connectors and our Flexible XLR Microphone cable 2 Core 28 AWG with 95% Braided Screen

Bespoke lengths are available - PLEASE CALL SALES FOR PRICING AND LEAD-TIME

XLR 3 Pole Male to Female Audio Cable

Manufactured using the high quality industry recognised Neutrik Male and Female XLR connectors and our Flexible XLR Microphone cable 2 Core 28 AWG with 95% Braided Screen

Standard lengths are - 1m, 2m, 3m, 5m, 10m, 15m, 20m and 30m

Bespoke lengths are available - PLEASE CALL SALES FOR PRICING AND LEAD-TIME

1m XLR 3 Pole Male to RCA Phono Male Audio Cable

Manufactured using the high quality industry recognised Neutrik Male XLR Connector and Neutrik/Rean Male Phono (RCA) connectors and Van Damme XKE Screened Microphone cable.

Colours - Black, Blue, Green, Purple, Red, Yellow, Orange, White, Grey and Brown

Bespoke lengths are available - PLEASE CALL SALES FOR PRICING AND LEAD-TIME

XLR 3 Pole Male to Bare End Audio Cable

Manufactured using a high quality industry recognised Neutrik Male XLR connector and our Flexible XLR Microphone cable 2 Core 28 AWG with 95% Braided Screen

Bespoke lengths are available - PLEASE CALL SALES FOR PRICING AND LEAD-TIME

1m EtherCON Cat5e Shielded Flexible Black Patch Lead

Robust patch lead manufactured with industry recognised EtherCON Connector Carriers and Tasker C725 PUR ExtraFlex Cat5e S/UTP cable.

Bespoke lengths are available - PLEASE CALL SALES FOR PRICING AND LEAD-TIME

1m EtherCON Cat6a Shielded Flexible Black Patch Lead

Robust patch lead manufactured with industry recognised EtherCON Connector Carriers and Tasker C728 PUR ExtraFlex Cat6a S/UTP cable.

Bespoke lengths are available - PLEASE CALL SALES FOR PRICING AND LEAD-TIME

XLR 3 Pole Female to Female Audio Cable

Manufactured using the high quality industry recognised Neutrik Female XLR connectors and connected using our Flexible XLR Microphone cable 2 Core 28 AWG with 95% Braided Screen

Standard lengths are - 1m, 2m, 3m, 5m, 10m, 15m, 20m and 30m

Bespoke lengths are available - PLEASE CALL SALES FOR PRICING AND LEAD-TIME

1m XLR 3 Pole Female to 1/4 inch Stereo Phone Plug Audio Cable

Manufactured using the high quality industry recognised Neutrik Female XLR Connector and 3 Pole 1/4 inch Professional Phone Plug and Van Damme XKE Screened Microphone cable.

Colours - Black, Blue, Green, Purple, Red, Yellow, Orange, White, Grey and Brown

Bespoke lengths are available - PLEASE CALL SALES FOR PRICING AND LEAD-TIME

XLR 3 Pole Male to Female Audio Cable

Manufactured using the high quality industry recognised Neutrik Male and Female XLR connectors and our Flexible XLR Microphone cable 2 Core 28 AWG with 95% Braided Screen

Standard lengths are - 1m, 2m, 3m, 5m, 10m, 15m, 20m and 30m

Bespoke lengths are available - PLEASE CALL SALES FOR PRICING AND LEAD-TIME

2m EtherCON Cat5e Shielded Flexible Black Patch Lead

Robust patch lead manufactured with industry recognised EtherCON Connector Carriers and Tasker C725 PUR ExtraFlex Cat5e S/UTP cable.

Bespoke lengths are available - PLEASE CALL SALES FOR PRICING AND LEAD-TIME

2m EtherCON Cat6a Shielded Flexible Black Patch Lead

Robust patch lead manufactured with industry recognised EtherCON Connector Carriers and Tasker C728 PUR ExtraFlex Cat6a S/UTP cable.

Bespoke lengths are available - PLEASE CALL SALES FOR PRICING AND LEAD-TIME

2m SpeakON 2 Pole Connectors 2.5mm Cable (Neutrik)

Manufactured using the high quality industry recognised SpeakON connectors and our 2 Pole 2 Core 2.5mm Speaker Cable

Bespoke lengths are available - PLEASE CALL SALES FOR PRICING AND LEAD-TIME

2m SpeakON 4 Pole Connectors 1.5mm Cable (Neutrik)

Manufactured using the high quality industry recognised SpeakON connectors and our 4 Pole 4 Core 1.5mm Speaker Cable

Bespoke lengths are available - PLEASE CALL SALES FOR PRICING AND LEAD-TIME

2m SpeakON 4 Pole Connectors 2.5mm Cable (Neutrik)

Manufactured using the high quality industry recognised SpeakON connectors and our 4 Pole 2 Core 2.5mm Speaker Cable

Bespoke lengths are available - PLEASE CALL SALES FOR PRICING AND LEAD-TIME

2m SpeakON 4 Pole Connectors 2.5mm Cable (Neutrik)

Manufactured using the high quality industry recognised SpeakON connectors and our 4 Pole 4 Core 2.5mm Speaker Cable

Bespoke lengths are available - PLEASE CALL SALES FOR PRICING AND LEAD-TIME

XLR 3 Pole Male to Female Audio Cable

Manufactured using the high quality industry recognised Neutrik Male and Female XLR connectors and our Flexible XLR Microphone cable 2 Core 28 AWG with 95% Braided Screen

Standard lengths are - 1m, 2m, 3m, 5m, 10m, 15m, 20m and 30m

Bespoke lengths are available - PLEASE CALL SALES FOR PRICING AND LEAD-TIME

3m EtherCON Cat5e Shielded Flexible Black Patch Lead

Robust patch lead manufactured with industry recognised EtherCON Connector Carriers and Tasker C725 PUR ExtraFlex Cat5e S/UTP cable.

Bespoke lengths are available - PLEASE CALL SALES FOR PRICING AND LEAD-TIME

3m EtherCON Cat6a Shielded Flexible Black Patch Lead

Robust patch lead manufactured with industry recognised EtherCON Connector Carriers and Tasker C728 PUR ExtraFlex Cat6a S/UTP cable.

Bespoke lengths are available - PLEASE CALL SALES FOR PRICING AND LEAD-TIME

XLR 3 Pole Male to Female Audio Cable

Manufactured using the high quality industry recognised Neutrik Male and Female XLR connectors and our Flexible XLR Microphone cable 2 Core 28 AWG with 95% Braided Screen

Standard lengths are - 1m, 2m, 3m, 5m, 10m, 15m, 20m and 30m

Bespoke lengths are available - PLEASE CALL SALES FOR PRICING AND LEAD-TIME

5m EtherCON Cat5e Shielded Flexible Black Patch Lead

Robust patch lead manufactured with industry recognised EtherCON Connector Carriers and Tasker C725 PUR ExtraFlex Cat5e S/UTP cable.

Bespoke lengths are available - PLEASE CALL SALES FOR PRICING AND LEAD-TIME

5m EtherCON Cat6a Shielded Flexible Black Patch Lead

Robust patch lead manufactured with industry recognised EtherCON Connector Carriers and Tasker C728 PUR ExtraFlex Cat6a S/UTP cable.

Bespoke lengths are available - PLEASE CALL SALES FOR PRICING AND LEAD-TIME

5m SpeakON 2 Pole Connectors 2.5mm Cable (Neutrik)

Manufactured using the high quality industry recognised SpeakON connectors and our 2 Pole 2 Core 2.5mm Speaker Cable

Bespoke lengths are available - PLEASE CALL SALES FOR PRICING AND LEAD-TIME

5m SpeakON 4 Pole Connectors 1.5mm Cable (Neutrik)

Manufactured using the high quality industry recognised SpeakON connectors and our 4 Pole 4 Core 1.5mm Speaker Cable

Bespoke lengths are available - PLEASE CALL SALES FOR PRICING AND LEAD-TIME

5m 1/4 inch 2 Pole (Mono) Phone Plug to RCA Male Mono Plug

Manufactured using the high quality industry recognised Neutrik Male 1/4 inch Phone Plug and a Neutrik/Rean Male Phono (RCA) connector and Van Damme Pro Grade Instrument cable.

Colours - Black, Blue, Green, Purple, Red, Yellow, Orange, White, Grey and Brown

Bespoke lengths are available - PLEASE CALL SALES FOR PRICING AND LEAD-TIME

XLR 3 Pole Male to Female Audio Cable

Manufactured using the high quality industry recognised Neutrik Male and Female XLR connectors and our Flexible XLR Microphone cable 2 Core 28 AWG with 95% Braided Screen

Standard lengths are - 1m, 2m, 3m, 5m, 10m, 15m, 20m and 30m

Bespoke lengths are available - PLEASE CALL SALES FOR PRICING AND LEAD-TIME

10m EtherCON Cat5e Shielded Flexible Black Patch Lead

Robust patch lead manufactured with industry recognised EtherCON Connector Carriers and Tasker C725 PUR ExtraFlex Cat5e S/UTP cable.

Bespoke lengths are available - PLEASE CALL SALES FOR PRICING AND LEAD-TIME

10m EtherCON Cat6a Shielded Flexible Black Patch Lead

Robust patch lead manufactured with industry recognised EtherCON Connector Carriers and Tasker C728 PUR ExtraFlex Cat6a S/UTP cable.

Bespoke lengths are available - PLEASE CALL SALES FOR PRICING AND LEAD-TIME

10m SpeakON 2 Pole Connectors 1.5mm Cable (Neutrik)

Manufactured using the high quality industry recognised SpeakON connectors and our 2 Pole 2 Core 1.5mm Speaker Cable

Bespoke lengths are available - PLEASE CALL SALES FOR PRICING AND LEAD-TIME

10m SpeakON 2 Pole Connectors 2.5mm Cable (Neutrik)

Manufactured using the high quality industry recognised SpeakON connectors and our 2 Pole 2 Core 2.5mm Speaker Cable

Bespoke lengths are available - PLEASE CALL SALES FOR PRICING AND LEAD-TIME

10m SpeakON 4 Pole Connectors 1.5mm Cable (Neutrik)

Manufactured using the high quality industry recognised SpeakON connectors and our 4 Pole 4 Core 1.5mm Speaker Cable

Bespoke lengths are available - PLEASE CALL SALES FOR PRICING AND LEAD-TIME

10m SpeakON 4 Pole Connectors 2.5mm Cable (Neutrik)

Manufactured using the high quality industry recognised SpeakON connectors and our 4 Pole 2 Core 2.5mm Speaker Cable

Bespoke lengths are available - PLEASE CALL SALES FOR PRICING AND LEAD-TIME

XLR 3 Pole Male to Female Audio Cable

Manufactured using the high quality industry recognised Neutrik Male and Female XLR connectors and our Flexible XLR Microphone cable 2 Core 28 AWG with 95% Braided Screen

Standard lengths are - 1m, 2m, 3m, 5m, 10m, 15m, 20m and 30m

Bespoke lengths are available - PLEASE CALL SALES FOR PRICING AND LEAD-TIME

15m SpeakON 2 Pole Connectors 1.5mm Cable (Neutrik)

Manufactured using the high quality industry recognised SpeakON connectors and our 2 Pole 2 Core 1.5mm Speaker Cable

Bespoke lengths are available - PLEASE CALL SALES FOR PRICING AND LEAD-TIME

15m SpeakON 2 Pole Connectors 2.5mm Cable (Neutrik)

Manufactured using the high quality industry recognised SpeakON connectors and our 2 Pole 2 Core 2.5mm Speaker Cable

Bespoke lengths are available - PLEASE CALL SALES FOR PRICING AND LEAD-TIME

XLR 3 Pole Male to Female Audio Cable

Manufactured using the high quality industry recognised Neutrik Male and Female XLR connectors and our Flexible XLR Microphone cable 2 Core 28 AWG with 95% Braided Screen

Standard lengths are - 1m, 2m, 3m, 5m, 10m, 15m, 20m and 30m

Bespoke lengths are available - PLEASE CALL SALES FOR PRICING AND LEAD-TIME

20m EtherCON Cat5e Shielded Flexible Black Patch Lead

Robust patch lead manufactured with industry recognised EtherCON Connector Carriers and Tasker C725 PUR ExtraFlex Cat5e S/UTP cable.

Bespoke lengths are available - PLEASE CALL SALES FOR PRICING AND LEAD-TIME

20m EtherCON Cat6a Shielded Flexible Black Patch Lead

Robust patch lead manufactured with industry recognised EtherCON Connector Carriers and Tasker C728 PUR ExtraFlex Cat6a S/UTP cable.

Bespoke lengths are available - PLEASE CALL SALES FOR PRICING AND LEAD-TIME

20m SpeakON 2 Pole Connectors 1.5mm Cable (Neutrik)

Manufactured using the high quality industry recognised SpeakON connectors and our 2 Pole 2 Core 1.5mm Speaker Cable

Bespoke lengths are available - PLEASE CALL SALES FOR PRICING AND LEAD-TIME

20m SpeakON 2 Pole Connectors 2.5mm Cable (Neutrik)

Manufactured using the high quality industry recognised SpeakON connectors and our 2 Pole 2 Core 2.5mm Speaker Cable

Bespoke lengths are available - PLEASE CALL SALES FOR PRICING AND LEAD-TIME

20m SpeakON 4 Pole Connectors 1.5mm Cable (Neutrik)

Manufactured using the high quality industry recognised SpeakON connectors and our 4 Pole 4 Core 1.5mm Speaker Cable

Bespoke lengths are available - PLEASE CALL SALES FOR PRICING AND LEAD-TIME

XLR 3 Pole Male to Female Audio Cable

Manufactured using the high quality industry recognised Neutrik Male and Female XLR connectors and our Flexible XLR Microphone cable 2 Core 28 AWG with 95% Braided Screen

Standard lengths are - 1m, 2m, 3m, 5m, 10m, 15m, 20m and 30m

Bespoke lengths are available - PLEASE CALL SALES FOR PRICING AND LEAD-TIME

30m SpeakON 4 Pole Connectors 2.5mm Cable (Neutrik)

Manufactured using the high quality industry recognised SpeakON connectors and our 4 Pole 4 Core 2.5mm Speaker Cable

Bespoke lengths are available - PLEASE CALL SALES FOR PRICING AND LEAD-TIME